Table of Contents
Advertisement
the system stack pointer SP is preincremented by 1 before SSH is written. This allows the system stack
to be efficiently extended using software stack pointer operations.
See Section A.10 for restrictions that apply to this instruction.
See restrictions in Section A.10.6 concerning Rn, Mn, and Nn registers as a
destination.
CCR Condition Codes:
For destination operand SR:
C
V
Z
N
I
LR
–
R
A
For destination operands other than SR:
C
V
Z
N
I
LR
–
R
A
ER Status Bits:
For destination operand SR:
INX
DZ
UNF
OVF
OPERR-Set according to bit 12 of the source operand.
SNAN -Set according to bit 13 of the source operand.
NAN
UNCC -Set according to bit 15 of the source operand.
MOTOROLA
- Set according to bit 0 of the source operand.
- Set according to bit 1 of the source operand.
- Set according to bit 2 of the source operand.
- Set according to bit 3 of the source operand.
- Set according to bit 4 of the source operand.
- Set according to bit 5 of the source operand.
- Set according to bit 6 of the source operand.
- Set according to bit 7 of the source operand.
- Not affected.
- Not affected.
- Not affected.
- Not affected.
- Not affected.
- Not affected.
- Not affected.
- Not affected.
-Set according to bit 8 of the source operand.
-Set according to bit 9 of the source operand.
-Set according to bit 10 of the source operand.
-Set according to bit 11 of the source operand.
-Set according to bit 14 of the source operand.
DSP96002 USER'S MANUAL
CAUTION
A - 265
Advertisement
Table of Contents
