Chapter 8
[3]
8.11.9 Left Deck Pickup Motor
8.11.9.1 Before Removing the Left Deck Pickup Motor
iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1) Remove the charger unit (this step is necessary only for iR5075 for Japan).
(page 10-22)Reference[Removing the Charger unit]
2) Remove the rear cover (upper). (page 10-13)Reference[Removing the
Rear Cover (Upper)]
3) Detach the rear cover (lower). (page 10-13)Reference[Removing the
Rear Cover (Lower)]
4) Remove the HVT PCB. (page 10-28)Reference[Removing HVT PCB]
8.11.9.2 Removing the Left Deck Pickup Motor
iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1) Remove the left deck pickup motor [3].
- 1 connector [1]
- 2 screws [2]
[1]
8.11.10 Right Deck Pickup Motor
8.11.10.1 Before Removing the Right Deck Pickup Motor
iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1) Remove the charger unit (this step is necessary only for iR5075 for Japan).
(page 10-22)Reference[Removing the Charger unit]
2) Remove the rear cover (upper). (page 10-13)Reference[Removing the
Rear Cover (Upper)]
3) Remove the rear cover (lower). (page 10-13)Reference[Removing the
Rear Cover (Lower)]
4) Remove the main controller box cover.(page 10-17)Reference[Remov-
ing the Main Controller Box Cover]
5) Remove the right cover (upper rear).(page 10-12)Reference[Removing
the Right Cover (Upper Rear)]
6) Remove the main controller box. (page 4-13)Reference[Removing the
Main Controller Box]
7) Remove the right cover (lower rear). (page 10-12)Reference[Removing
the Right Cover (Lower Rear)]
8) Remove the collecting toner bottle holder. (page 5-29)Reference[Re-
moving the Collecting Toner Bottle Holder]
8.11.10.2 Removing the Right Deck Pickup Motor
iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1) Remove the right deck pickup motor [3].
8-36
[2] [1]
[1]
[1]
F-8-80
[3]
[2]
[2]
F-8-81
- 2 screws [1]
- 1 connector [2]
0015-4995
8.11.11 Left Deck Pickup Sensor
8.11.11.1 Before Removing the Left Deck Feeding Sensor
iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1) Detach the duplexing feed front cover.(page 10-14)Reference[Remov-
ing the Duplexing Feed Front Cover]
2) Remove the duplex feeding unit.(page 8-49)Reference[Removing the
0015-4997
Duplex Feeding Unit]
8.11.11.2 Removing the Left Deck Feeding Sensor
iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1) Remove the connector [1] and the 2 screws [2] from the lower side of the
duplex feeding unit and remove the sensor together with its mount [3].
2) Remove the left deck feeding sensor [1].
0015-4999
8.11.12 Left Deck Pickup Solenoid
8.11.12.1 Before Removing the Left Deck Pickup
Solenoid
iR5065 / iR 5055 / iR5075 / iR5075N / iR5065N / iR5055N
1) Remove the charger unit (this step is necessary only for iR5075 for Japan).
0015-5004
(page 10-22)Reference[Removing the Charger unit]
2) Remove the rear cover (upper). (page 10-13)Reference[Removing the
Rear Cover (Upper)]
[3]
[1]
[2]
F-8-82
[3]
[2]
[2]
[1]
F-8-83
[1]
F-8-84
[1]
0015-9411
0015-9410
0015-5005