Double Feeding Detection Pcb ( Transmission ); Double Feeding Detection Pcb ( Reception ) - Canon imageRUNNER 7095 Service Manual

3) Remove the lower left cover [1].
- 4 screws [2]
[1]
[2]
F-10-89
4) Remove the power code base [1].
- 4 screws [2]
- 4 connectors [3]
[3]
[2]
F-10-90
10.5.30.2 Removing the Transceiver PCB
1) Remove the transceiver unit [1].
- 2 screws [2]
[2]
[1]
F-10-91
[3]
[3]
[1]
[2]
0011-4914
[2]
2) Free the cable from the edge saddle [1]; then,
remove the 4 screws [2] to detach the
transceiver unit cover [3].
[3]
[2]
F-10-92
3) Remove the transceiver PCB [1].
- nut [2]
- washer [3]
- 2 screws [4]
- 2 locking supports [5]
[4]
[5]
F-10-93
10.5.31 Double Feeding Detection PCB (
Transmission )
10.5.31.1 Before Starting the Work
1) Slide out the fixing/feeding unit.
2) Remove the transfer/separation charging
assembly cover.
3) Remove the 2 knobs [1].
- 2 screws [2]
[2]
F-10-94
Chapter 10
[1]
[2]
[2]
[3]
[1]
[1]
0011-8279
10-25