Fixing/Feeding Outlet Sensor; Delivery Speed Switch Clutch - Canon imageRUNNER 7095 Service Manual

Chapter 9
7) Remove the 2 screws [1], and detach the lower
separation claw support plate [2].
[1]
[2]
F-9-67
8) Remove the fixing lower roller.
9) Remove the fixing inlet guide [1].
- 2 screws [2]
10) Remove the 2 screws [3].
[2] [1]
F-9-68
9.5.15.2 Removing the Fixing Inlet
Sensor/Fixing Inlet HP Sensor
1) Remove the fixing inlet sensor [1] and the
fixing inlet HP sensor [2].
- 1 connector [3] (1 pc. each)
[1]
F-9-69
9-22
[1]
[3] [2]
[2] [3]
[3]

9.5.16 Fixing/Feeding Outlet Sensor

9.5.16.1 Remove the Fixing/Feeder Unit
Outlet Sensor
1) Slide out the fixing/feed unit
2) Remove the screw [1] from the bottom face of
the fixing/feeder unit; then, detach the fixing/
feed outlet sensor [2].
[1]
3) Disconnect the connector [1], and detach the
fixing/feed outlet sensor [2].

9.5.17 Delivery Speed Switch Clutch

0011-7953
9.5.17.1 Removing the Delivery Speed
Switching Clutch
1) Slide out the fixing/feeder unit.
2) Remove the fixing motor.
3) Remove the 3 screws [1], and detach the fixing
front support base [2].
[2]
F-9-70
[1]
[2]
F-9-71
[1]
[2]
[1]
F-9-72
0010-9549
0010-9550