Canon imageRUNNER 7095 Service Manual page 518

Hide thumbs Also See for imageRUNNER 7095:
Table of Contents

Advertisement

Chapter 17
Sub item
PJH-P-2
Use it to print out the data on the history of print jobs with details. (all jobs)
<Procedure>
1) Select the item.
2) Press the OK key to obtain a printout.
P-TR-
Use it to check the activation of the pre-transfer exposure lamp.
EXP
<Procedure>
1) Select the item, and press the OK key so that the pre-transfer exposure lamp goes on.
2) See that the lamp goes on and remains on for several seconds and then goes off
automatically.
CL-ADJ
Use it to adjust the timing at which a clutch goes on and off.
<SENS-ADJ>
Sub item
OP-SENS Use it to execute automatic adjustment of the optical sensor.
1) Place paper in all decks and cassettes.
2) Select the item, and press the OK key.
3) See that 'ACTIVE' is indicated, with the result (OK/NG) indicated for the sensors that have
been checked in sequence.
<SYSTEM>
Sub item
DOWNL
Use it to switch over to download mode.
OAD
<Procedure>
1) Select the item.
2) Press the OK key to switch to the Download mode screen.
CHK-
Use it to specify the partition (No.) for which HD-CHECK, HD-CLEAR will be executed.
TYPE
<Procedure>
1) Select the item.
2) Type in the number of the partition using the keypad, and press the OK key.
0: entire HDD*
1: FSTDEV (compression image data), IMG_MNG (file control table, profile), FSTCDEV
(job archiving)
2: AP_GEN (general-purpose data, TMP_GEN (temporary file), TMP_PSS (for PDL
spooling)
3: PDLDEV (PDL-related file)
4: BOOTDEV (various firmware such as system software and content)*
5: APL_MEAP (MEAP application)
6: APL_SEND (address book, filter)
7: not used
8: APL_KEEP (non-initialization; for storage)
*: HD-CLEAR will not initialize the HDD. If necessary, use the SST/USB memory in safe
mode.
HD-
Use it to check and recover the partition selected by CHK-TYPE.
CHECK
<Procedure>
1) Select the item.
2) Press the OK key.
3) See the result (1: OK; 2: NG (hardware); 3: NG (software); recovery/alternative sector).
17-56
COPIER > FUNCTION > MISC-P
Description
T-17-44
COPIER > FUNCTION > SENS-ADJ
Description
T-17-45
COPIER > FUNCTION > SYSTEM
Description
Level
1
2
2
Level
2
Level
1
1
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imagerunner 7105Imagerunner 7086

Table of Contents