Order Of Installing Accessories - Canon imageRUNNER 7095 Service Manual

Chapter 2

2.1.5 Order of Installing Accessories

If you are planning to install other accessories also, go through the following in the order indicated:
1. side paper deck [1] (See the Side Paper Deck Installation Procedure.)
2. high-capacity stacker [2] (See the high-Capacity Stacker Installation Procedure.)
3. finisher [3]/saddle finisher [4] (See the "Preparing the Finisher" in "Finisher/Saddle Finisher Installation
Procedure".)
4. finisher accessories power supply unit [5] (See the Finisher Accessories Power Supply Unit Installation
Procedure.)
5. inner puncher unit [6]* (See the Puncher Unit Installation Procedure.)
6. paper folding unit [7] (See the Paper Folding Unit Installation Procedure.)
7. professional puncher (non-Japanese model only) [8]* (See the Professional Puncher Installation
Procedure.)
8. inserter [9] (See the Inserter Installation Procedure.)
9. trimmer [10] (See the Trimmer Installation Procedure.)
* The inner puncher unit [6] and the professional puncher unit (non-Japanese model only) [8] cannot be
installed as part of the same system.
[3]
[10]
2-6
[9]
[7]
[6]
[5]
[2]
[8]
F-2-5
[4]
0011-6504
[1]