Canon imageRUNNER 7095 Service Manual page 152

Chapter 5
3) Remove the reader rear cover [1].
- 5 screws [2]
[2]
F-5-97
F-5-98
5.4.8.3 Removing the Scanner Motor
1) Slide out the reader power supply cover [1].
- 4 screws [2]
- Free the cable from the wire saddle found
behind the cover.
[2]
F-5-99
2) Disconnect the connector [1] of the interface
PCB.
F-5-100
5-34
[1]
[2]
0011-8657
[1]
[2]
[1]
3) Shift the scanner motor [1] in the direction of
the arrow to detach.
- 2 springs [2]
- 3 screws [3]
[2]
[2]
F-5-101
5.4.8.4 Mounting the Scanner Motor
When mounting the scanner motor, check to be
sure that the timing belt [3] is properly fitted to
the scanner pulley [1] and the motor shaft [2].
[3]
F-5-102
[2]
F-5-103
[3]
[1]
0011-7978
[1]
[3]