Timer Settings - Canon imageRUNNER 7095 Service Manual

Chapter 1
Item
Reversed Display (Color)
Offset Jobs*2
Job Separator between Jobs ON/OFF*1
Job Separator between
Copies
Number of Copies/Wait
Time Status Display
Register Sizes for Side Paper
Deck*2
Different Paper Sizes for the
Output Tray*2
Cleaning Display for the
Original Scanning Area
Limited Functions Mode*2 Finisher Tray A/B: ON/OFF*1
Shutdown Mode
Initialize Common Settings Initialize

1.2.3.2 Timer Settings

*1 Indicates the default setting.
Item
Time Fine Adjustment
Auto Sleep Time
Auto Clear Time
Time Until Unit Quiets Down
Daily Timer Settings
Low-power Mode Time
1-12
Settings
ON/OFF*1
ON*1/OFF
ON/OFF*1
ON*1/OFF
A3/A4/A4R/B4/B5/11"X17"/LGL/LTR/LTRR
ON*1/OFF
ON*1/OFF
Finisher Saddle Stitcher Unit: ON/OFF*1
Finisher Inserter: ON/OFF*1
Folding Unit: ON/OFF*1
Puncher Unit: ON/OFF*1
Stacker: ON/OFF*1
Press [Start]
T-1-4
Setting
00:00 to 23:59, in one minute increments
10, 15, 20, 30, 40, 50 min., 1 hour*1, 90 min., 2, 3, 4 hours
0 (Off) to 9 minutes, in one minute increments; 2 min.*1
0 (Off) to 9 minutes, in one minute increments; 1 min.*1
Sunday to Saturday, 00:00 to 23:59, in one minute increments
10, 15*1, 20, 30, 40, 50 min., 1 hour, 90 min., 2, 3, 4 hours
0010-7413