Registration Brake Clutch; Fixing/Feed Unit - Canon imageRUNNER 7095 Service Manual

5) Loosen the 2 adjusting screws [1], and detach
the registration clutch [2].
F-8-105
[A]
F-8-106
When mounting the registration clutch, be sure to
hook the clutch stop [A] on the protrusion [B] of
the clutch cover.

8.11.16 Registration Brake Clutch

8.11.16.1 Removing the Registration
Brake Clutch
1) Remove the transfer separation charging
assembly front cover. (1 screw)
2) Disconnect the connector [1], and loosen the 2
screws [2] (w/ hex hole); then, detach the
registration brake clutch [3].
F-8-107
[2]
[1]
[1]
[B]
[2]
[3]
[1]
[2]

8.11.17 Fixing/Feed Unit

8.11.17.1 Removing the Fixing/Feed Unit
1) Slide out the fixing/feed unit.
2) Remove the 2 stepped screws [1].
3) Remove the fixing/feed unit [1] from the slide
rail [2].
Be sure to work as a group of two.
0010-9183
[1]
[1]
F-8-108
[1]
[2]
F-8-109
Chapter 8
0010-9186
8-43