Cover Switch Assembly; Manual Feed Tray Switch Assembly - Canon imageRUNNER 7095 Service Manual

10.5.13.2 Removing the Control Panel
LCD
1) Remove the control panel LCD [1].
- 2 screws [2]
F-10-48

10.5.14 Cover Switch Assembly

10.5.14.1 Removing the Front Cover
Switch Assembly
1) Remove the upper front cover unit.
2) Remove the 3 screws [1], and detach the cover
switch assembly [2].
[1]
[2]
F-10-49
3) Disconnect the 3 connectors [1], and detach the
cover switch assembly [2].
F-10-50
0011-8161
[1]
[2]
0010-9616
[1]
[2]
[1]
10.5.15 Manual Feed Tray Switch
Assembly
10.5.15.1 Removing the Manual Feed
Tray Switch Assembly
1) Remove the process unit cover. (4 screws)
2) Remove the 2 screws [1], and disconnect the 2
connectors [2]; then, detach the pre-transfer
charging assembly fan [3].
[1]
F-10-51
3) Disconnect the 3 connectors [1], and remove
the screw [2]; then, detach the potential sensor
PCB [3].
[1]
[1]
F-10-52
4) Remove the screw [1], and disconnect the 2
connectors [2]; then, detach the manual feed
tray switch assembly [3].
F-10-53
Chapter 10
0010-9615
[2]
[3]
[3]
[2]
[3]
[1]
[2]
10-17