Measure against 0300JAM(wrong detection of double feed)at
feeding of Washi (JPN Paper)
[Symptom]
When feeding Washi(JPN Paper),0300JAM may occur.
0300JAM : Detected Double Feed
[Cause]
When Washi (JPN Paper) such as "Kiku (93 g/m2)" is fed, the output of the sensor may be reduced due to the principle of the
Double Feed Sensor, resulting in the incorrect detection of double feed.
[Service work]
Turn OFF double feed detection. (Set the following service mode (Lv.2) to "1".)
Service Mode > COPIER > OPTION > FNC-SW > DUP-SNS
127