Canon imageRUNNER 7095 Service Manual page 69

Chapter 2
23) Mount the lock hinge cover R [1].
- 2 bosses [2]
- 2 screws (P tightening; M3X10) [3]
[2]
[1]
[2]
F-2-84
24) Mount the lock hinge cover L [1].
- 2 bosses [2]
- screw (TP; M3x6) [3]
MEMO:
Keep the arm and the control panel upright to fa-
cilitate mounting of the lock hinge cover R.
[2]
[1]
F-2-85
25) Tilt the control panel [1] in the direction of
the arrow.
F-2-86
2-22
26) Fit the Hinge slide cover [1] in the direction
of the arrow.
[3]
27) Fix the Hinge slide cover in place.
- 2 screws (TP; M3X6) [1]
- 2 Cover rubber (for M3)
28) Hook the claw [1] of the rear upper right
cover on the hole [2] of the cover support plate;
then, fit the rear upper right cover [3] in place.
- 3 screws [4] (removed in step 1))
- screw (included; binding; M4X10) [5]
[3]
[1]
[1]
F-2-87
[1]
[2]
F-2-88
[1]
[3]
[4]
F-2-89
[1]
[2]
[5]
[4]