Left Deck Pickup Sensor; Right Deck Pickup Sensor; Manual Tray Assembly - Canon imageRUNNER 7095 Service Manual

Chapter 8

8.11.5 Left Deck Pickup Sensor

8.11.5.1 Removing the Left Deck Pickup
Sensor
1) Remove the front deck (left) pickup assembly.
2) Remove the screw [1], and detach the pickup
sensor unit [2].
F-8-63
3) Disconnect the connector [1], and detach the
left deck pickup sensor [2].
F-8-64
When removing the scanner sensor, be sure to re-
move the paint used to lock the claw in place in
advance to prevent breaking the claw. When
mounting it, be sure the claw is not displaced or
the sensor is not disoriented.

8.11.6 Right Deck Pickup Sensor

8.11.6.1 Removing the Right Deck Feed
Sensor/Right Deck Pickup Sensor
1) Remove the front deck (right) pickup
assembly.
2) Remove the guide plate [1].
F-8-65
8-36
[1] [2]
[1]
[2]
[1]
3) Remove the screw [1], and detach the stack
eliminator [2].
4) Remove the 2 screws [3], and detach the
pickup assembly sensor base [4].
0010-8963
[2]
5) Disconnect the connector [1] (1 pc. each), and
free the claw; then, detach the right deck feed
sensor [2] and the right deck pickup sensor [3].
When removing the scanner sensor, be sure to re-
move the paint used to lock the claw in place in
advance to prevent breaking the claw. When
mounting it, be sure the claw is not displaced or
the sensor is not disoriented.

8.11.7 Manual Tray Assembly

8.11.7.1 Removing the Manual Feeder
Tray Unit
1) Open the manual feeder tray cover.
0010-8987
2) Remove the door tape [1].
- 1 screw [2]
3) Remove the connector cover [3].
- 1 screw [4]
[3]
[4]
[1]
F-8-66
[1]
[2]
[3]
F-8-67
[2] [1]
[4] [3]
F-8-68
[3]
0010-8989