Separation Heat Discharge Fan; Reader Heat Discharge Fan 2; Fixing Inlet Sensor Motor - Canon imageRUNNER 7095 Service Manual

10.5.44 Separation Heat Discharge Fan

10.5.44.1 Removing the Separation Heat
Discharge Fan (FM20)
1) Remove the rear cover.
2) Disconnect the connector, and remove the 2
screws [2]; then, detach the separation heat
discharge fan [3].
[2]
[3]
F-10-119

10.5.45 Reader Heat Discharge Fan 2

10.5.45.1 Removing the Reader Heat
Discharge Fan 2
1) Remove the upper rear cover.
2) Remove the reader heat discharge fan 2 unit
[1].
- 1 connector [2]
- 2 screws [3]
[3]
F-10-120
3) Remove the reader heat discharge fan 2 [1]
- 2 screws [2]
- 1 connector [3]
[3]
F-10-121
[1]
[2]
[2]
[1]
[1]
[2]

10.5.46 Fixing Inlet Sensor Motor

10.5.46.1 Before Starting the Work
1) Open the front cover, and slide out the fixing/
0010-9574
feeding unit.
2) Remove the fixing assembly.
10.5.46.2 Removing the Fixing Inlet
Sensor Lifter Motor
1) Remove the blocking cover [1].
- 2 screws [2]
2) Remove the fixing inlet sensor lifter motor
assembly [1].
0011-7434
- 1 connector [2]
- 1 screw [3]
3) Remove the fixing inlet sensor lifter motor [1].
- 2 screws [2]
[1]
[2]
F-10-122
[2] [1]
[3]
F-10-123
[1]
[2]
F-10-124
Chapter 10
0011-7957
0011-7958
10-31