Canon imageRUNNER 7095 Service Manual page 218

7.10.8.2 Removing the Sub Hopper Unit
1) Remove the upper rear right cover [1].
- 3 screws [2]
[1]
[2]
F-7-74
2) Remove the hopper upper cover [1].
- 3 blocking rubber pieces [2]
- 3 screws [3]
3) Remove the hopper right cover [4].
- 3 blocking rubber pieces [5]
- 3 screws [6]
[1]
F-7-75
4) Remove the fixing plate [1].
- 3 screws [2]
F-7-76
[2]
[3]
[2]
[6]
[5]
[4]
[2] [1]
5) Remove the toner supply cover [1].
- 3 screws [2]
0011-7550
[1]
6) Remove the blocking cover [1].
- 1 screw [2]
7) Remove the screw [1].
8) Disconnect the 3 connectors [1], and remove
the 2 screws [2]. (found on the inner side of the
main power switch)
F-7-77
[1] [2]
F-7-78
F-7-79
[1]
[2]
F-7-80
Chapter 7
[2]
[1]
7-41