Parts Replacement Procedure; Left Pickup Drive Assembly; Pickup Drive Assembly - Canon imageRUNNER 7095 Service Manual

10.5

Parts Replacement Procedure

10.5.1 Left Pickup Drive Assembly

10.5.1.1 Removing the Left Pickup Drive
Assembly
Construction
F-10-5
1) Remove the rear cover.
2) Open the main controller box assembly.
3) Remove the high-voltage PCB unit.
4) While detaching the belt [1], remove the three
screws [2], and detach the left pickup drive
assembly [3].
[1] [3]
[2]
F-10-6
[2]
[2]

10.5.2 Pickup Drive Assembly

10.5.2.1 Removing the Pickup Drive
Assembly
Construction
0010-9572
1) Remove the rear cover.
2) Remove the high-voltage PCB unit.
3) Remove the flywheel.
4) Remove the drum gear.
5) Remove the waste toner pipe.
6) Remove the two screws [1], and loosen the
harness guide [2]; disconnect the two
connectors [3], and remove the six screws [4];
then, detach the pickup drive assembly [5].
[3]
[1]
F-10-7
[4]
[4]
[5]
[2]
[4]
F-10-8
Chapter 10
0010-9576
10-9