0004/0005/0006 Jam Code (Measure Against Double Feeding Jam When The Document Is Fed By Adf) - Canon imageRUNNER ADVANCE C2000 Series Technical Workbook

copyboard glass was scanned (copied).
1) Let the machine go into Sleep Mode with its feeder being opened.
2) Close the feeder while the machine stays in Sleep Mode, and then let the machine go out of the mode.
3) Place originals on the feeder and press the Start button; then the symptom occurs.
Cause
Although the feeder was opened and closed while the machine was in Sleep Mode, the feeder open/close
detection signal was not sent to the main controller PCB 1.
Service work
Upgrade the machine's system to Ver.21.01 or later.
Make the following combination upon upgrading.
MN-CONT: Ver.21.01/DC-CON: Ver.40.03/G3 FAX: Ver.2.05/Inner Finisher-C1 SORTER: Ver.6.03
Title

0004/0005/0006 jam code (Measure against double feeding jam when the document is fed by ADF)

Symptom
Machines having serial numbers earlier than below had multiple feed jam (0004/0005/0006 Jam Code)
when documents were fed.
- 0004: Registration stationary jam
- 0005: Read sensor delay jam
- 0006: Read sensor stationary jam
Cause
Depending on paper types, separation capability of separation pad may be decreased.
TP11 324b.pdf
Service work
Following the steps below, implement replacement with the separation pad unit holder (FL3-5538-000)[1] of
which the separation capability has been improved.
pg. 54