Adf Open/Close Sensor - Canon imageRUNNER 7095 Service Manual

5.4.9 ADF Open/Close Sensor

5.4.9.1 Before Starting the Work <iR7105/
7095>
1) Remove the reader rear cover.
2) Remove the reader upper rear cover.
3) Remove the interface PCB cover.
5.4.9.2 Removing the ADF Open/Closed
Sensor <iR7105/7095>
1) Remove the sensor mounting plate [1].
- 1 connector [2]
- 1 screw [3]
F-5-104
2) Remove the ADF Open/Closed Sensor.
5.4.9.3 Before Starting the Work
<iR7086>
1) Disconnect the 3 connectors [1].
[1]
F-5-105
2) Remove the upper rear cover [1].
- 3 screws [2]
[1]
F-5-106
[3]
[1]
[2]
[2]
3) Remove the reader rear cover [1].
- 5 screws [2]
0011-8671
0011-8672
5.4.9.4 Removing the ADF Open/Closed
Sensor 1, 2 <iR7086>
1) Disconnect the connector [1].
0011-8116
[2]
F-5-107
[2]
F-5-108
[2]
[1]
F-5-109
Chapter 5
[1]
0011-7979
5-35