Canon imageRUNNER 7095 Service Manual page 159

13) Shift the reader power supply cover to the
front.
14) Remove the ADF right hinge base [1].
- 7 screws [2]
[2]
[2]
F-5-142
15) Remove the 4 screws [1], and shift the ADF
open/closed sensor assembly [2] and the ADF
open/closed sensor lever assembly [3] to the
front.
[3]
F-5-143
16) Remove the reader rear cover (small) [1].
- 1 screw [2]
17) Remove the plate [3].
- 3 screws [4]
[4]
F-5-144
[1]
[1] [2]
[1]
[3]
[3]
[1]
[1]
[2]
[2]
18) Remove the ADF left hinge base [1].
- 7 screws [2]
[2]
[2]
5.4.13.2 Before Starting the Work
<iR7086>
1) Remove the control panel support unit.
2) Remove the control panel support unit base
[1].
- 5 screws [2]
3) Remove the hopper upper cover.
4) Remove the reader right cover [1].
[1]
[2]
F-5-145
[2]
[1]
[2]
F-5-146
F-5-147
Chapter 5
[2]
0011-8119
[1]
5-41