Canon imageRUNNER 7095 Service Manual page 516

Chapter 17
*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
Sub item
MMI Use it to reset user mode settings.
- backup data for copier control panel (user settings)
- backup data for common settings (user settings)
- various backup data (user settings)
The settings will be reset when the main power is turned off and then back on.
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the power.
MN-CON Use it to initialize the RAM on the main controller PCB.
<Procedure>
1) Print out the particulars of service mode by making the following selections: COPIER >
FUNCTION > MISC-P > P-PRINT.
2) Select the item, and press the OK key.
3) Turn off and then back on the main power.
4) As necessary, enter the data printed out using P-PRINT.
CARD Use it to reset the data related to the card ID (group).
The data will be reset when the main power is turned off and then back on.
<Procedure>
1) Select the item, and press the OK key.
2) Turns off and then back on the main power.
ALARM Use it to reset the alarm log.
The log will be reset when the main power is turned off and then back on.
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the main power.
SLT-CLR Use it to reset the salutation setting.
<Procedure>
1) Select the item, and press the OK key.
LANG- Use it to reset a language-related error.
ERR
The error will be reset when the main power is turned off and then back on.
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the main power.(resets to the default language)
ERDS- Use it to reset the E-RDS-related settings.
DAT
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the main power.
SND- Use it to reset the transmission read settings.
STUP
The settings will be reset when the main power is turned off and then back on.
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the main power.
CA-KEY Use it to reset the CA certificate and key.
The certificate and key will be reset when the main power is turned off and then back on.
<Procedure>
1) Select the item, and press the OK key.
2) Turn off and then back on the main power.
17-54
COPIER > FUNCTION > CLEAR
Description Level
1
1
1
1
1
1
1
2
2