Developing Cylinder Clutch; Transfer/Separation Charging Assembly - Canon imageRUNNER 7095 Service Manual

Chapter 7

7.10.13 Developing Cylinder Clutch

7.10.13.1 Before Starting the Work
1) Remove the rear cover.
2) Remove the high-voltage assembly.
3) Remove the flywheel [1].
- 2 screws [2]
[2]
F-7-101
4) Disconnect the 2 connectors [1], and remove
the 5 screws [2]; then, detach the clutch
mounting plate [3].
[1]
[2]
[1]
F-7-102
7.10.13.2 Removing the Developing
Cylinder Clutch
1) Remove the developing cylinder clutch [1].
F-7-103
7-46
0011-7626
[1]
[2] [3]
[2]
0010-8875
[1]
2) Remove the 6 E-rings [1], 2 bearings [2], 2
gears [3], and pin; then, detach the clutch
[5].
[1]
[2]
[1]
[1]
F-7-104
7.10.14 Transfer/Separation Charging
Assembly
7.10.14.1 Removing the Transfer/
Separation Charging Assembly
1) Open the front cover.
2) Slide out the fixing/feeding assembly.
3) Remove the screw [1], and detach the charging
cover [2].
[2]
F-7-105
4) Remove the screw [1], and detach the fixing
plate [2]; then, disconnect the connector [3],
and detach the transfer/separation charging
assembly [4].
[3]
[4]
F-7-106
[5]
[1]
[2]
[1]
[1]
[3]
[4]
[1]
[6]
[5]
0010-8876