Canon imageRUNNER 7095 Service Manual page 55

Chapter 2
5) Close the upper right cover.
6) Shift up the grip (front, rear) [1] found on the
left side of the machine.
[1]
Be sure to go through steps 7) and 8) in correct se-
quence; otherwise, the machine can become dis-
placed.
7) Holding the grips (front, rear) on the delivery
side of the machine, lift the machine slightly to
remove the pad.
At this time, put away the plastic bag toward
the pad.
F-2-10
2-8
[1]
F-2-9
8) Holding the grips (front, rear) on the pickup
side of the machine, lift the machine slightly,
and remove the remaining pad and the plastic
bag at the same time.
F-2-11
9) Shift the 2 adjusters (front) [1] found at the
bottom of the machine so that they face
upward, making sure that they are unlocked.
F-2-12
10) Take out the 2 slope plates [2] from the
middle of the skid [1].
[1]
F-2-13
[1]
[2]