Scanner Home Position Sensor - Canon imageRUNNER 7095 Service Manual

5.4.11 Scanner Home Position Sensor

5.4.11.1 Before Starting the Work
<iR7105/7095>
1) Remove the reader rear cover [1].
- 2 connectors [2]
- 5 screws [3]
[2]
[3]
F-5-116
2) Remove the reader upper rear cover.
3) Remove the interface PCB cover [1].
- 2 screws [2]
- 8 screws [3]
[2]
F-5-117
4) Slide out the rear upper cover [1] to the front.
- 3 screws [2]
[1]
F-5-118
0011-8629
[1]
[3]
[1]
[3]
[2]
5.4.11.2 Removing the Scanner Home
Position Sensor <iR7105/7095>
1) Remove the reader rear cover (small) [1].
- 1 screw [2]
2) Remove the plate [3].
- 3 screws [4]
[4]
F-5-119
3) Remove the sensor mounting plate [1].
- 1 screw [2]
[2]
[1]
F-5-120
4) Remove the scanner home position sensor [1].
- 1 connector [2]
[2]
F-5-121
Chapter 5
0011-8645
[3]
[3]
[1]
[1]
[2]
[2]
[1]
5-37