Scheduled Maintenance Work Procedure - Canon imageRUNNER 7095 Service Manual

Chapter 13
Other than the iR7086
Ozone filter
for FM8
Ozone filer
for FM20
Ozone filter
for FM2

13.3.3 Scheduled Maintenance Work Procedure

Perform the following to service the area around the drum as part of scheduled maintenance:
Work 1
a. cleaning the side scraper assembly
b. cleaning the toner receptacle
Do not rotate the magnet roller drive assembly during the work. Doing so could cause waste toner to drop
from the cleaner assembly.
1) Slide out the process unit.
Be sure to place paper over the fixing/transport unit.
2) Take out the photosensitive drum.
3) Remove the cleaning blade assembly.
4) Move the waste toner collecting in front of the magnet roller [1] and the scraper [2] using a piece of
paper [3] in the direction of the feedscrew (rear).
13-8
iR7086
Dust filter
for FM501
Dust filter
for FM502
Ozone filter
for FM2
Dust filter
for FM501
Dust filter
for FM1
Dust filter f
or FM10
Dust filter
for front cover
Dust filter
for FM3
F-13-2
[3]
[1]
F-13-3
Ozone filter
for FM8
Ozone fil
ter for FM20
[2]
Dust filter
for FM1
Dust filter
for FM10
Dust filter
for front cover
Dust filter
for FM3
0010-9514