Canon imageRUNNER 7095 Service Manual page 529

*: model equipped with DADF-Q1 (outside Japan: iR7105/7095; inside Japan: All model).
**: model equipped with DADF-M1 (outside Japan: iR7086).
Sub item
NS- Use it to set restrictions on the use of NTLM authentication for SMTP authentication.
NTLM
settings
0: depend on SMTP server (default); 1: disable
NS- Use it to set restrictions on the use of PLAIN/LOGIN authentication for SMTP authentication.
PLNWS
Use it to set restrictions on the use of PLAIN/LOGIN (plain text authentication for SMTP
authentication) in an environment in which communication packets are encrypted.
settings
0: depend on SMTP server (default); 1: disable
NS-PLN Use it to set restrictions on PLAIN/LOGIN authentication (plain text authentication) for SMTP
authentication.
Use it to set restrictions on the use of PLAIN/LOGIN (plain text authentication for SMTP
authentication) in an environment in which communication packets are not encrypted.
0: depend on SMTP server (default); 1: disable
NS-LGN Use it to set restrictions on the use of LOGIN authentication for SMTP authentication.
settings
0: depend on SMTP server (default); 1: disable
MEAP- Use it to change the HTTP port number for MEAP applications.
PN
settings
0 to 65535 (default: 8000)
SPECK- Use it to switch between the timing of white plate dust detection.
SW *
settings
0: normal timing; 1: for each job
SVMD- Use it to switch between methods of starting service mode.
ENT
settings
0: user mode key -> 2 and 8 at same time -> user mode key (default)
1: user mode key -> 4 and 9 at same time -> user mode key
DA- Use it to set WPGW(Workplace Gateway) connection.
CNCT
settings
0: off (default); 1: on
CHNG- Use it to set the ToT status connection port number.
STS
Changes the port number for status connection in a TUIF over TCP/IP environment.
settings
1 to 65535 (default: 20010)
CHNG- Use it to set the ToT command connection port number.
CMD
Use it to set the port number for the command connection in an TUIF over TCP/IP
environment.
settings
1 to 65535 (default: 20000)
MEAP- Use it to prohibit a switch-over from the MEAP screen to the Native screen.
DSP
settings
0: off (shift to Native screen; default); 1: on (do not shift to Native screen)
ANIM- Use it to prohibit display of the Error/Jam screen while a MEAP application is in operation.
SW
settings
0: off (display warning screen; default); 1: on (do not display warning screen)
MEAP- Use it to set the HTTPS port for MEAP.
SSL
settings
0 to 65535 (default: 8443)
KSIZE- Use it to support Chinese paper (K size).
SW
settings
0: support (default); 1: do not support
COPIER > OPTION > BODY
Description
Chapter 17
Level
2
2
2
2
2
2
2
2
2
2
2
2
2
2
17-67