Table of Contents
Advertisement
Appendix A
The Operator / Special Prints menu contains two possible selections: the Menu Tree
and the Table Grid. If you need an udated version of these print files or if you loose
the original file, they are all available for downloading at the ODGS web site
T220UVcustomer support page:
http://www.oce-dgs.com/PrinterSupport/T220_Customer/
T220_Customer_Access.htm
These files are also available at the ODGS FTP site (login as anonymous):
ftp://ftp.cymbolic.com/Downloads/Inkjet/ArizonaT220/ImageData/
T220UV_Specific
0.1Installation Procedure
Transfer the downloaded special print file to the T220UV by copying it from the hard
drive on the computer. There are two methods for copying files: a) SCSI transfer
using T220 Tools software; and b) parallel transfer using a command line.
Note:
The Menu Tree and Grid files appear in the Operator / Special Prints menu
after they are transferred and not the Print Queue like regular print files.
0.1.1
Method A - SCSI Transfer with T220 Tools
Make sure that you have installed and configured the T220 Tools software before
using this method.
1.
Navigate to the Download menu by clicking on the Download tab.
2.
Click on the radio button labelled Image Files.
3.
Click on the Browse button and then navigate to the folder where you stored the
Special print file downloaded from the web or FTP site.
4.
Select the file and then click on the Open button.
5.
In the Download menu, click the Download button to transfer the file to the printer.
6.
Use the Operator / Special prints menu to access the downloaded file.
6/2/04
Installing Special Prints
|
-113-
Advertisement
Table of Contents
Troubleshooting
