Handling And Installing Media; Installing Roll Media - Oce CS9160 User Manual

4.3 HANDLING AND INSTALLING MEDIA

Notes
• Refer to "General info on usable media" for details on media handling.
•
It is recommended to use tested and compatible media for this printer.
Refer to the following topics for types and details of media:
"General info on usable media"
o

4.3.1 Installing roll media

Notes
There are two optional winding systems available for the CS9160
Unwinder/Winder 100 (Only available as option in Europe/ROW)
o
Motorized winding system with tensioning (T winder) (Standard delivered in North America,
o
option in Europe/ROW)
•
Please refer to the User Guide of the chosen system to know how to correctly load media
•
Refer to the pricing sheet for more details of these systems.
•
If you do not use one of the above winding systems. You have to use the scroller which is
supplied with the printer.
•
For media with a three inch core, three inch core adapters have to be used.
Notes
•
Set the roll media on a flat and levelled surface.
• If the roll media and scroller are placed in a vertical position, the scroller might get damaged.
Notes
•
The following roll media can be attached to the scroller supplied with this unit.
Media tube diameter: three inches, outside diameter of media: 150mm or less, weight: 30kg
o
or less.
Be sure to read and understand the safety warnings before handling the printer.
User's Guide Océ CS9160 printer
46 AP-40790 – Rev 2.0 -23/08/2011,