Chapter 12
F-12-174
12.5.24.8 Removing the Fixing
Heat Discharge Fan
1) Remove the 2 screws [1], and disconnect the
connector [2]; then, detach the fixing heat discharge
fan [3].
F-12-175
12.5.24.9
Removing
Developing Drive Unit
1) Disconnect the connector [2] of the developing
motor [1], and free the harness [3] from the cable
clamp [4].
12-56
0000-5252
the
0000-5253
F-12-176
2) Remove the 2 screws [1], and detach the main
controller base [2].
F-12-177
3) Remove the 7 screws [1], and detach the
developing drive assembly [2].
F-12-178