Canon iR C3200 Series Service Manual page 997

Code Detail Description
FFXX
Detail code of E602
Last 2 bytes of detail code (indicated by XX)
01
02
03
10
11
12
13
14
21
22
23
24
25
E604 There is a shortage in image memory (SDRAM).
0000
E605 The battery for image memory is faulty.
E606 The hard disk is faulty.
Timing of detection
A fault exists in a partition that
cannot be identified. (For detail
code, see below.)
Description
Device error: sector, write/abort,
other HDD access (driver) error
File system (logic) error: error
detection by check processing;
mounting failure
Other error: HDD connector fault;
HDD detection failure; secondary
error as of DRAM fault
HD controller HD controller IC,
driver No. error
HD controller IC, driver not
installed
HD controller IC, system error
HD controller IC, device error
HD controller IC, parameter error
packet R/W file operation, system
error
packet R/W file operation,
parameter error
packet R/W file operation, packet
DMC error
packet R/W file operation, packet
DMAC time-out
packet R/W file operation, HD
controller IC error
The remaining space in image
memory is inadequate for the
intended write/read operation.
A specific drop in voltage has been
detected.
Chapter 17
17-17