Blank - Canon iR C3200 Series Service Manual

18.4.1.4 BLANK

18.4.1.4.1 BLANK-T
Adjustment
method
Adjustment
range
18.4.1.4.2 BLANK-L
Adjustment
method
Adjustment
range
18.4.1.4.3 BLANK-R
Adjustment
method
Adjustment
range
T-18-52
Used to enter adjusted value of image blank width (leading
edge).
- If you have cleared the main controller PCB's RAM or replaced
the SRAM PCB, enter the value on the service label.
0 to 1000 (Value at time of factory shipment/value after RAM
clear: +59)
T-18-53
Used to enter adjusted value of image blank width (left
edge).
- If you have cleared the main controller PCB's RAM or replaced
the SRAM PCB, enter the value on the service label.
0 to 1000 (Value at time of factory shipment/value after RAM
clear: +47)
T-18-54
Used to enter adjusted value of image blank width (right
edge).
- If you have cleared the main controller PCB's RAM or replaced
the SRAM PCB, enter the value on the service label.
0 to 1000 (Value at time of factory shipment/value after RAM
clear: +47)
Chapter 18
0000-5415
0006-1544
0006-1545
18-71