Canon iR C3200 Series Service Manual page 1099

Chapter 18
- System management settings > Network settings > Ethernet driver
settings > Ethernet type
- System management settings > Network settings > Startup time
- Common specifications settings
The following user mode settings are turned OFF:
- System management settings > Network settings > TCP/IP settings > IP
address setting > DHCP use
- System management settings > Network settings > TCP/IP settings > IP
address settings > RARP use
- System management settings > Network settings > TCP/IP settings > IP
address settings > BOOTP use
- System management settings > Network settings > Ethernet driver
settings > Automatic detection
- System management settings > Network settings > Spool function use
When 3 or 4 is selected as the setting value, the following settings are
turned OFF in addition to the items above.
- System management settings > Network settings > TCP/IP settings >
RAW setting
- System management settings > Network settings > TCP/IP settings >
LPD setting
- System management settings > Network settings > TCP/IP settings > IPP
printing
- System management settings > Network settings > SMB setting
The items above are not restored when the setting value is returned to "0:
Normal mode", so must be set again as needed.
18-93