Canon iR C3200 Series Service Manual page 1109

BKTC-DWN
Countermeasures against fogged image due to Bk supply
Settings:
0: OFF
1: ON
[Factory default/After RAM clear: 0]
Set this mode to [1 (countermeasures: ON)] when fogged image due to Bk supply occurs.
ANIM-SW
Settings
DA-PORT
Settings
Note
DA-CNCT
Settings
T-18-104
Disabling to display all jam/alarm messages when MEAP application is
running
0: Warning messages are displayed. [Factory default/After RAM
clear]
1: Warning messages are not displayed.
T-18-105
Setting port for communication with DA
0: Close [Factory default/After RAM clear:0]
1: Open
The following modes also become ON when
COPIER>OPTION>BODY>DA-CNCT is set to '1'.
COPIER>OPTION>BODY>STS-PORT
COPIER>OPTION>BODY>CMD-PORT
COPIER>OPTION>BODY>SSH-SW
COPIER>OPTION>BODY>DA-PORT
T-18-106
Setting connection to DA
1: DA is used
2: DA is not used [Factory default/After RAM clear:0]
Chapter 18
0007-6216
0006-8676
0006-8679
0006-8705
18-103