F-10-271
2) Remove the duct.
When removing the gear, pay attention not to lose the
parallel pin found at the rear.
3) Remove the 2 E-rings [1], gear [2], and link [3];
then, remove the screw [4] to detach the grounding
wire [5].
F-10-272
4) Remove the 2 screws [1], and detach the motor base
[2].
F-10-273
5) Remove the gear [1] and the bearing [2] at the rear.
F-10-274
6) Remove the 2 duplex auxiliary guides [1] of the
duplex roller.
F-10-275
Chapter 10
10-93