Chapter 10
1) Attach the bushing [1] to the frame; then, attach the
gear shaft [2].
F-10-85
2) Fit the 6 locations [A] indicated in the figure firmly
into the holes of the mounting plate; then, secure
the sensor mounting plate [2] in place.
F-10-86
3) Attach the gear [1] and the E-ring [2].
F-10-87
4) Turn the gears to see that the movement is smooth.
10-50
10.10.10 Slide Resistor
10.10.10.1
Removing
Manual Feed Unit
1) Press the release button [1] on the machine's right
side to slide out the manual feed unit [2].
F-10-88
2) Remove the screw [1] and the stopper plate [2];
then, detach the manual feed unit [3].
F-10-89
10.10.10.2
Removing
Manual Feed Tray Unit
1) Remove the 3 screws [1], and detach the base [2].
the
0000-4995
the
0000-4996