F-12-120
12.5.19.3 Removing the Inside
Cover
1) Open the front cover and the drum unit cover.
2) Remove the 5 screws [1], and detach the inside
cover [2].
F-12-121
12.5.19.4 Removing the Upper
Rear Cover
1) Remove the upper rear cover.
12.5.19.5 Removing the Lower
Rear Cover
1) Remove the lower rear cover.
12.5.19.6 Removing the Left
Upper Rear Cover
1) Removing the left rear upper cover.
12.5.19.7 Removing the DC
Controller PCB Cover
1) Remove the 8 screws [1], and detach the DC
controller PCB cover [2].
0000-5217
When Attaching the DC Controller PCB Cover
When attaching the cover, take care so that the cut-off
will not come into contact with the latch of the flat
cable. Otherwise, the flat cable can come loose.
0000-5218
0000-5219
F-12-122
[1]
F-12-123
Chapter 12
0000-5222
0000-5221
12-43