Canon iR C3200 Series Service Manual page 493

F-10-246
Points to Note When Mounting the Delivery
Vertical Path Unit
When attaching, engage the left/right hook [1] found
on the side of the delivery vertical path unit on the
plate on the side of the machine, and secure it with
screws. (Be sure to tighten the left screw first.)
F-10-247
10.10.29.4
Removing
Delivery Vertical Path Unit
(New)
the
0006-8956
For the new delivery vertical path unit to function, the
version of the DC controller must be 3.06 or later. Be
sure to check its version in service mode:
COPIER>DISPLAY>VERSION>D-CON.
1) Slide out the fixing/feeding unit.
2) Open the delivery vertical path cover [1]; then,
remove the 2 screws [2], and detach the upper left
cover [3].
F-10-248
3) Remove the screw [1], and detach the delivery
inside cover [2]; then, detach the delivery vertical
path cover [3] from the machine.
F-10-249
4)
To detach the delivery vertical path unit, lift the unit
and then pull it out toward the front.
Chapter 10
10-87