Chapter 18
18.4.3 ADJUST (Adjustment Mode) Level 2
18.4.3.1 COPIER
18.4.3.1.1 DENS
T-SPLY-Y
Adjustment
method
Adjustment range
T-SPLY-M
Adjustment
method
Adjustment range
T-SPLY-C
Adjustment
method
Adjustment range
T-SPLY-K
Adjustment
method
Adjustment range
18-76
T-18-64
Adjusting the amount of toner supply (Y color)
Enter a value of the service label when RAM of the DC controller
PCB has been cleared/the DC controller has been replaced.
-3 to 5 [Factory default/After RAM clear:0]
T-18-65
Adjusting the amount of toner supply (M color)
Enter a value of the service label when RAM of the DC controller
PCB has been cleared/the DC controller has been replaced.
-3 to 5 [Factory default/After RAM clear:0]
T-18-66
Adjusting the amount of toner supply (C color)
Enter a value of the service label when RAM of the DC controller
PCB has been cleared/the DC controller has been replaced.
-3 to 5 [Factory default/After RAM clear:0]
T-18-67
Adjusting the amount of toner supply (K color)
Enter a value of the service label when RAM of the DC controller
PCB has been cleared/the DC controller has been replaced.
-3 to 5 [Factory default/After RAM clear:0]
0007-6096
0007-6098
0007-6106
0007-6107