Canon iR C3200 Series Service Manual page 998

Chapter 17
Code
E674
E674
E711
E712
E713
17-18
Detail Description
0001
0002
The fax board is faulty.
0000
Communication error with PS print server unit C1
0003
0010
0080
There is a fault in IPC communication.
0001 There is a fault in data
communication. The ADF
controller or the reader controller
PCB is faulty. The connector
between the reader unit and the
DADF has poor contact.
0002 There is a fault in data
communication. The finisher
controller, pedestal controller, or
DC controller PCB is faulty. The
connector between the finisher
and the machine has poor
connection.
There is a fault in the communication between the ADF and the reader unit.
0000 There is a fault in data
communication. The ADF
controller or the reader controller
PCB is faulty. The connector
between the reader unit an the
ADF has poor contact.
There is a fault in the communication between the finisher and the cassette pedestal.
Timing of detection
A HD mounting error is detected
when the HD is booted from BOOT
ROM.
A reading error is detected when the
HD is booted from BOOTROM.
While the PS Print Server Unit C1
is starting up, a communication
error occurs.
A controller other than a PS Print
Server Unit C1 is detected.
A communication error occurs after
the PS Print Server Unit C1 has
started up.
An error has been detected 4 times
or more for 1.5 sec after the
communication is disrupted
between the reader unit and the
DADF.
An error has been detected 4 times
or more for 1.5 sec after the
communication between the
finisher and the machine is
disrupted and, in addition, an
attempt at recovery has failed.
An attempt at recovery fails 5 sec or
more after the communication
between the reader unit and the
ADF has been disrupted.