Canon IR6000 Quick Manual

Canon IR6000 Quick Manual

Basic & advanced copying features
Hide thumbs Also See for IR6000:

Advertisement

QUICK GUIDE
BASIC & ADVANCED
COPYING FEATURES
IR2200, IR2800, IR3300, IR4600, IR5000, IR6000
NOTE:
Certain features in this guide may not appear on your machine due to
machine configuration.

Advertisement

Table of Contents
loading

Summary of Contents for Canon IR6000

  • Page 1 QUICK GUIDE BASIC & ADVANCED COPYING FEATURES IR2200, IR2800, IR3300, IR4600, IR5000, IR6000 NOTE: Certain features in this guide may not appear on your machine due to machine configuration.
  • Page 2: Basic Features

    Use the manual feed on the right hand side of the machine, to copy onto light card (check paper weights for your machine) or transparencies (only Canon transparencies to be used). Transparencies must never be placed in any of the front loading cassettes.
  • Page 3: Sample Set

    INTERRUPT Use the interrupt mode to interrupt the current job to make priority copies 1. Press Interrupt button. 2. Place originals, reset the copier, set the desired copy settings and press the Start button. 3. Once the originals are scanned, remove them from the machine, and wait for the machine to bleep indicating that the interrupt copy is made.
  • Page 4 FINISHER - Collate/Group/Staple/Hole Punch Copy sets are collated in various ways depending on the machine configuration (optional accessories). 1. Place originals in document feeder. 2. Press the Finisher button. 3. Select the desired option - Collate/Group/Staple. 4. Press the OK button. 5.
  • Page 5 ENLARGING/REDUCING REDUCING (Preset) To reduce A3→ A4 1. Place the A3 original in the document feeder, or place original on platen glass. 2. Press the Copy Ratio button. 3. Press A3→A4 button (left hand side). 4. Enter the desired number copies, and press the Start button. ENLARGING (Preset) To enlarge A4→A3 1.
  • Page 6: Double Sided Copying

    DOUBLE SIDED COPYING Use to make 2 sided copies. 1. Place originals in document feeder (except book, place on platen glass). 2. Press the 2 sided button. 3. Select the desired option and press the OK button. 4. Enter the desired number copies, press the Start button. Single-sided originals to double-sided copies Double-sided originals to double-sided copies Double-sided originals to single-sided copies...
  • Page 7: Advanced Features

    ADVANCED FEATURES TWO-PAGE SEPARATION Copies 2 facing pages in a book or a magazine onto 2 separate A4 sheets. 1. Press Special Features button. 2. Press Two-Page Separation button. 3. Press Done button. 4. Place the original on the platen glass, and press the Start button. BOOKLET Re-paginates page order of originals so that copies are made into booklets.
  • Page 8: Mode Memory

    MODE MEMORY Stores nine copy settings for frequently used copy functions. 1. Set the copy settings to be stored. 2. Press Special Features button. 3. Press Mode Memory, and press Store/Erase button. 4. Press Store, select location M!-M9, and press Next button. 5.
  • Page 9: Transparency Interleaving

    TRANSPARENCY INTERLEAVING The machine automatically interleaves a sheet of paper between each transparency. The interleaf sheets protect the copies surface of the transparencies. 1. Press Special Features button. 2. Select Transparency Interleaving button. 3. Select the size of the transparencies, and press Next button. 4.
  • Page 10: Frame Erase

    SHIFT Copies and moves the image, when copying from originals, which are smaller than the output paper size. 1. Press Special Features button. 2. Press Shift button. 3. Select the shift direction, and press OK and Done buttons. 4. Place originals in the document feeder and press the start button. MARGIN Moves the entire original by a designated width to create a wider margin.
  • Page 11: Image Combination

    IMAGE COMBINATION Automatically reduces 2, 4 or 8 pages to fit on one or both sides of output paper size. 4 On 1 8 on 1 1. Press Special Features button. 2. Press Image Combination button. 3. Specify the original size and type, and press Next button. 4.
  • Page 12: Mirror Image

    MIRROR IMAGE Image is reversed as a reflection in the mirror. 1. Press Special Features button. 2. Press button to display the second screen. 3. Press Mirror Image button, and press Done button. 4. Place originals and press the start button. IMAGE REPEAT Images are repeated in vertical and horizontal direction.

This manual is also suitable for:

Ir5000Ir4600Ir3300Ir2800Ir2200

Table of Contents