Canon iR C3200 Series Service Manual page 1151

E602-0x01
- Indicates the presence of a data error in the identified partition.
- To correct, format the identified partition.
Formatting Partitions Using the SST
Name of partition that may be selected by
the SST
FSTDEV
DOSDEV3
PDLDEV
DOSDEV4
DOSDEV5
BOOTDEV
FSTDEV and FSTPDEV retains image data as it accumulates while DOSDEV and DOSDEV2 retains its associated
data; these 4 partitions, therefore, must be formatted at the same time.
To do so, select FSTDEV using the SST.
The actual formatting of FSTDEV and PDLDEV takes place when the machine is started up the next time, and it
takes as long as the following:
FSTDEV:2 min (approx.)
PDLDEV:5 min (approx.)
all partitions:7 min (approx.; i.e., FSTDEV + PDLDEV)
The times vary according to the state of the HDD, and the progress of formatting is indicated by means of a progress
bar.
Formatting of DOSDEV4 requires the use of the SST.
T-19-4
Partition that is formatted
FSTDEV, FSTPDEV, DOSDEV,
DOSDEV2
DOSDEV3
PDLDEV
DOSDEV4
DOSDEV5
BOOTDEV
Chapter 19
19-19