Canon iR C3200 Series Service Manual page 488

Chapter 10
F-10-226
7) Remove the dummy connector [1] from the
machine. (The dummy connector will no longer be
used.)
F-10-227
8) Fit the top [1] of the new delivery vertical path
inside of the machine plate [2].
When mounting the delivery vertical path unit, be sure
to lift it once before setting it in place.
Engage the left and right hooks [3] on the machine
plate [4] so as to set the new delivery vertical path
unit in place.
10-82
F-10-228
9) Using 4 screws, secure the delivery vertical path
unit [3] in place; then, connect the 3 connectors. At
this time, check to make sure that the machine
positioner [4] is properly in place.
F-10-229
10) Mount the new delivery vertical path cover [1] to
the machine; then, fix the delivery inside cover [2]
in place using a screw [3].