Fixing Unit - Canon iR C3200 Series Service Manual

Chapter 10
7) Remove the screw [1], and disconnect the
connector [2]; then, detach the delivery path
switching solenoid 2 [3] together with the base.
F-10-276
8) Free the claw of the gear [1] at the front; then, slide
the roller to the rear, and remove the gear [1] and
the bearing [2].
F-10-277
9) Remove the duplexing roller [1].
F-10-278
10-94
Points to Note When Attaching the Duplex Roller
1) Be sure that the longer side [A] of the D-cut in the
roller shaft [1] is toward the front.
F-10-279
2) When monting, be sure that the front tip of the
roller shaft is in contact with the grounding plate
[A].
F-10-280
10.10.33 Duplex Feed Motor
10.10.33.1
Removing

Fixing Unit

1) Slide out the fixing/feeding unit.
2) Remove the 2 screws [1], and detach the fixing unit
the
0000-4903