Canon iR C3200 Series Service Manual page 308

Chapter 9
Cumulative output
is 100 pages or
more and less
than 200 pages
Cumulative output
is 200 pages or
more
COPIER>OPTION>BODY>INTROT-1
Use it to change the intervals between sessions of execution of image stabilization control (adjustment set-1) for
initial/last rotation in terms of the number of pages.
Default (at shipment/upon RAM initialization): 100
COPIER>OPTION>BODY>INTROT-2
Use it to change the intervals between execution sessions of image stabilization control (adjustment set-2) for
initial/last rotation in terms of the number of pages.
Default (at shipment/upon RAM initialization): 500
COPIER>OPTION>BODY>PPR-1
Use it to change the intervals of execution sessions (adjustment set-1) for image stabilization control between
sheets in terms of the number of pages.
Default (at shipment/upon RAM initialization): 200
COPIER>OPTION>BODY>INTROT-T
Use it to change the intervals of execution sessions for image stabilization control for standby.
Default (at shipment/upon RAM initialization): 2
COPIER>OPTION>BODY>ADJ-LVL
Use it to change the execution mode settings for image stabilization control for a specific number of pages.
Default (at shipment/upon RAM initialization): 0
9-16
1st page 2nd page 99th page 105th page
Continuous jobs
Control executed during post rotation
of last sheet of job in excess of 100 pages
199th 200th
page page
*1 : job next to the one ending in excess of 100 pages.
*2 : counter reading returns to '0' when control is executed.
: timing at which control is executed.
F-9-13
next job *
Control executed also
during initial rotation
of next job *
201st page 400th page 401st page
Pickup stopped once;
then, control executed
between sheets every
2
200 pages *
1
2
Pickup stopped once;
then, control executed
between sheets every
2
200 pages *