Canon iR C3200 Series Service Manual page 870

Chapter 16
16.3.5.3.17 Print settings made in printer driver were not effective when printing multiple sheets of
MS Excel data
[ Case in the field ]
< Field Remedy >
In order to print multiple sheets of MS Excel data with some special features (e.g. duplex mode, specifying a
particular paper source), it is necessary to make those settings for every sheet. Before printing, make the
appropriate settings in [Properties] of the printer driver for every sheet.
16.3.5.3.18 When printing three-page document (PDF in this case) via UFR, 1st page is misaligned
and iRC3200 locks up with 'Waiting to print' indication during printing 3rd page
[ Case in the field ]
Field Remedy
In the field, this symptom occurred because the Main Controller PCB (Main) was faulty. Unplug and insert the
connectors on the PCB. If the symptom still recurs, replace the PCB with a new one.
Main Controller PCB (Main): FG3-2854
16.3.5.3.19 PS-C1: Image data attached to document becomes mirror image
[ Verified by Canon Inc. ]
Description
This symptom can occur in the combination below:
Operating System: Windows 98/Me
Application Software: Word2000
Field Remedy
This symptom has been corrected with a patch file '1-9C5YH'. Install it at the time of its occurrence.
16.3.5.3.20 To Activate ICC Profile when ICM Mode Is Selected in Printer Driver
Symptom
To Activate ICC Profile when ICM Mode Is Selected in Printer Driver
Overview
Select a color profile when you select ICM Mode for the Matching Mode in the Color Settings dialog.
Cause
There are two tab sheets for ICM controls on the driver. Without properly setting the relevant controls, you cannot
get the print results as desired.
Field Remedy
Field Countermeasure
Take the following steps for setting a color profile.
1. Open the Color Management tab sheet in the Properties for the printer.
2. Select Manual radio button.
Note: When Automatic is selected, the printer driver automatically selects the printer profile that matches the printer.
When Manual is selected, the color profile selected in the Color Profiles list box is used for printing.
3. If the list does not have the desired profile, click Add button, select the desired profile, and click Add button to
add the profile in the list.
16-96
0005-4584
0005-6179
0003-8610
0002-5425