Removing The Dc Controller Pcb Cover - Canon iR C3200 Series Service Manual

11.5.15.4 Removing
Controller Box Cover
1) Disconnect the connector J1512 [1] from the power
distribution PCB, and free the harness from the
wire saddle [2]; then, remove the 6 screws [3], and
detach the main controller cover [4].
F-11-233
11.5.15.5 Removing the DC
Controller PCB Cover
1) Remove the 8 screws [1], and detach the DC
controller PCB cover [2].
F-11-234
the
0006-2289
0006-2302
When Attaching the DC Controller PCB Cover
When attaching the cover, take care so that the cut-off
will not come into contact with the latch of the flat
cable. Otherwise, the flat cable can come loose.
[1]
F-11-235
11.5.15.6 Opening the Main
Controller Box
1) Remove the 2 flat cables [1] used to connect the DC
controller PCB and the main controller PCB.
F-11-236
2) Remove the 9 screws [1] of the main controller box.
Chapter 11
0006-2304
11-65