Canon iR C3200 Series Service Manual page 551

F-10-495
11) Fix the upper left cover [1] using 2 screws [2];
then, close the delivery vertical path cover [3], and
put the fixing/feeding unit back in its initial
position.
F-10-496
10.10.46.5 Removing the Face-
Down Delivery Sensor 1
1) Shift up the sensor flag [1] of the face-down
delivery sensor 1, and pull it upward to detach.
F-10-497
2) Disconnect the connector [1], and remove the face-
down delivery sensor 1 [2].
MEMO:
The edge of the sensor flag is cut to an I-shape,
permitting it to be removed upward.
0000-8470
Points to Note When Attaching the Sensor Flag
When attaching the sensor flag, be sure to match the
L-shaped area [A] of the spring against the groove [B]
in the face-down delivery sub frame.
Chapter 10
F-10-498
F-10-499
F-10-500
10-145