Canon iR C3200 Series Service Manual page 531

F-10-412
10.10.42.4
Removing
Delivery Vertical Path Unit
(New)
For the new delivery vertical path unit to function, the
version of the DC controller must be 3.06 or later. Be
sure to check its version in service mode:
COPIER>DISPLAY>VERSION>D-CON.
1) Slide out the fixing/feeding unit.
2) Open the delivery vertical path cover [1]; then,
remove the 2 screws [2], and detach the upper left
cover [3].
F-10-413
3) Remove the screw [1], and detach the delivery
the
0006-8959
inside cover [2]; then, detach the delivery vertical
path cover [3] from the machine.
F-10-414
4)
To detach the delivery vertical path unit, lift the unit
and then pull it out toward the front.
Disconnect the 2 concoctors [1], and remove the 4
screws [2]; then, detach the delivery path unit [3].
(The delivery path unit will no longer be used.)
F-10-415
Chapter 10
10-125