F-11-188
4) Remove the fixing heat retaining heater [1].
F-11-189
11.5.12.5
Removing
Pressure Roller
1) While opening the delivery lower guide [1], remove
the pressure roller [2].
F-11-190
the
0000-5107
11.5.12.6 Remove the Delivery
Lower Guide
1) Remove the mounting screw [1] of the static
eliminator.
F-11-191
2) Remove the fixing pin [1] of the delivery lower
guide.
F-11-192
3)
When removing the side plate at the front/rear, be sure
to start at the rear.
Otherwise, the side plate at the rear can break the
boss on the lower frame.
Remove the 2 screws [1] from the bottom face of the
lower frame, and detach the side plate [2] at the front
and the side plate [3] at the rear (the releasing shaft [4]
and the delivery lower guide [5] are kept attached).
Chapter 11
0000-5108
11-55