Canon iR C3200 Series Service Manual page 849

Field Remedy
Initialize 'Copy Settings'. In user mode [Copy Settings>Initialize Copy Settings], select 'Yes'.
16.3.4.4.8 Machine rebooting or hanging up (locking up/nonoperational) upon release of FAX line
[ Verified by Canon Inc. ]
Field Remedy
This symptom has been corrected with System software Ver.9.05. If the machine you are servicing is earlier
than Ver.9.05, upgrade it to Ver.9.05 and later.
16.3.4.4.9 Machine hanging up (locking up/nonoperational) during auto gradation adjustment (full
correction)
[ Verified by Canon Inc. ]
Field Remedy
This symptom has been corrected with System software Ver.7.01. If the machine you are servicing is earlier
than Ver.7.01, upgrade it to Ver.7.01 and later.
16.3.4.4.10 Set values in service mode (level 2) [COPIER>Adjust>COLOR (to adjust color balance
for each level of density)] return to '0' after power OFF/ON0Ç...ñ?ÇÈ
[ Verified by Canon Inc. ]
Field Remedy
This symptom was corrected with System software Ver.9.05. Upgrade it to Ver.9.05 and later.
16.3.4.4.11 Machine rebooting upon completion of broadcasting
[ Verified by Canon Inc. ]
Description
This symptom can occur upon outputting Send TX Report with the image after broadcasting to more than 50
destinations has been completed.
Field Remedy
This symptom has been corrected with System software Ver.8.04. If the machine you are servicing is earlier
than Ver.8.04, upgrade it to Ver.8.04 and later.
16.3.4.4.12 PS-C1: Setup Information of PS-C1 disappears on rare occasions
[ Verified by Canon Inc. ]
Field Remedy
The setup information of PS-C1 can disappear on rare occasions. This symptom has been corrected with the
PS-C1 system Ver.1.1.1, so upgrade it to Ver.1.1.1 and later.
16.3.4.4.13 iRC3200 displays Mailbox window on touch panel, not Copy, after startup is completed
[ Inspected by Canon Inc. ]
< Field Remedy >
As a result of inspection, it was found that this symptom occurred because the Interface PCB was faulty. Unplug
and reinsert the connectors on it. If the symptom still recurs, replace it with a new one.
Interface PCB: FM2-0036
Chapter 16
0003-8643
0003-8645
0003-8652
0004-0628
0004-9870
0005-6102
16-75