E540 Error Code Detail There Is A Fault In The Ascent/Descent Of The Tray - Canon iR C3200 Series Service Manual

Chapter 16

16.3.10.70 E540 Error code detail There is a fault in the ascent/descent of the tray.

Symptom
E540 There is a fault in the ascent/descent of the tray. (Error code detail)
Description
Detail
0001
0002
0003
16.3.10.71 E577 Error code detail
(counterclockwise direction).
Symptom
E577 There is a fault in stack processing (counterclockwise direction). (Error code detail)
Description
Detail
16-154
Description
The tray ascent/descent motor
(M5), the tray ascent/descent
motor clock sensor (PI9/PI19),
or tray home position sensor
(PIE) is faulty.
The tray upper limit detecting
switch (MS5) is faulty.
The tray ascent/descent motor
(M5) or the tray ascent /descent
motor clock sensor 1/2 (PI9/
PI19) is faulty.
There is a fault in stack processing
Description
The stack processing motor (M2) or the
return controller home position sensor
(S3) is faulty. The connector is
disconnected. The stack delivery lever
or the return roller is faulty.
T-16-35
Timing of detection
The ascent/descent operation does not end
within 15 sec after the tray assent/descent
motor has been driven; or, the tray home
position is not detected when it has been
driven for 15 sec.
The tray upper limit detecting switch is
ON during tray ascent/descent operation.
There is no clock pulse for 0.2 sec or more
from the clock sensor when the tray
ascent/descent motor has been driven.
T-16-36
Timing of detection
The return roller fails to reach the
return roller home position sensor
when the stack processing motor
has been driven for a required
period of time.
0002-1711
0002-1714